Frequently Asked Questions
Why should I have a security alarm system?
Having a security alarm system may decrease the chances of a burglary. Even if the alarm system does not keep a burglar from breaking in, it may cause the burglar to stay a shorter amount of time.
What Should a Security Alarm System Include?
Most systems rely on a combination of contacts placed at doors and motion sensors. It is best that all exterior potential points of entry have contacts that sense when they are open. Glass break sensors are also available. The basic elements of a standard home security system include:
Control panel
This is where the system wiring terminates, the backup battery is located and where it is connected to the phone lines if it is a monitored system.
Keypad
This is where the system is armed and disarmed.
Siren
The obvious method to alert you of an activation
Inside motion detector
These sense changes in a room caused by human presence. Special motion detectors are available for people who have pets.
Door and window contacts
This sounds the alarm when the door or window is opened (and the system is on).
A central monitoring station (Company)
If the system is monitored, and the alarm is set off, the control panel sends a message to a central monitoring station, which is manned 24 hours a day.
After attempting to contact the homeowner, the central monitoring station will contact the police, fire department, or medics.
Additional items that can be added to the basic system are:
Smoke detectors:
An essential part of your home safety
Panic buttons
Closed circuit TV
to allow monitoring and/or recording inside or outside a home.
Monitored System or Unmonitored System….
What is the difference?
- The security system senses something.
- The security system waits 30 to 45 seconds to give the homeowner a chance to deactivate the system to prevent false alarms.
- If the alarm is not deactivated the security system sends a message to the monitoring company over telephone lines.
- The monitoring company receives the message and verifies the alarm, generally by placing a phone call to the home. If they do not receive the proper password or do not receive an answer, they call the police.
- The police respond.
Monitored systems typically work as follows:
Unmonitored systems typically have on-site alarms and/or flashing lights. It relies on neighbours to call police. Neighbours or passers by should never investigate an alarm themselves. With an unmonitored system, it is best to have a combination of strobe lights and alarms. They should be located on the street side of the house and in an inaccessible spot as possible. It is best to discuss the installation with your neighbours and to place the siren and flashing light on the house where it can be easily seen.









